How Do I Install Custom Door Sill Plates on My Ford?


To install custom door sill plates on your Ford, first gather essential tools: a tape measure, gentle cleaner, plastic tool, heat gun, and safety gear. Prepare the sill area by opening doors, removing loose dirt with a vacuum, cleaning with a mild car cleaner, and wiping down with isopropyl alcohol. After drying, test fit the plates, ensuring proper alignment and door functionality. Secure plates by repositioning them according to your previous markings, peeling the sticky tape, and pressing evenly. Using rust-resistant screws can extend longevity. Conclude with a final inspection to verify alignment, adhesion, and aesthetics, setting the stage for more nuanced information.

Gather Your Tools

When you're ready to put in custom door sill plates for your Ford, having the right tools can make things go smoothly.

Start with a tape measure so you can get the perfect fit for your sill plates. Use a gentle cleaner to get rid of any dirt where the plates will go, and wipe it down with a microfiber cloth to make sure it's spotless.

Grab a plastic tool to take off the old plates without scratching anything. A heat gun can help the adhesive stick better, especially if it's cold where you are. You might need some double-sided tape if your plates don't already have sticky backing.

A rubber mallet is handy to tap the plates into place without damaging them.

Don't forget safety goggles and gloves to keep yourself protected while you work. With these tools, you're all set for a smooth installation.

Prepare the Sill Area

To get your car's door sill area ready for new sill plates, start by opening the doors so you can reach the sill. Use a vacuum with a small nozzle to suck up any loose dirt or dust. This helps the sill plates stick well.

Next, grab a mild car cleaner or mix some soap with water. Use a soft microfiber cloth to wipe the area clean. Make sure to get into any small cracks or edges where dirt hides, as this can stop the plates from sticking properly.

Once clean, rinse the sill with water and dry it with another soft cloth. This removes leftover moisture.

For the best results, take an isopropyl alcohol wipe and gently clean the sill area. This gets rid of any oils or residues that might cause problems when sticking the plates.

Let the area air dry before you move on. A clean surface makes for a smooth and lasting installation.

Test Fit the Plates

Make sure the door sill plates on your Ford are lined up right for both looks and protection. Before you attach them, check how they fit. Place each plate gently on the door sill, making sure there are no blocks or wrong alignments. They should fit the sill's shape without leaving gaps or being uneven.

Look at how they line up with the door frame and nearby surfaces. The design, whether it's carved or raised, should be centered and balanced. This step helps you see if you need to make changes, like cutting or moving them, for a better fit.

Think about what the plates are made of, as this affects how easy they are to fit. Stainless steel plates might need more exact placement because they're stiff, while rubber or plastic ones are a bit flexible.

Use a non-permanent marker to trace where the plate should go, helping with the final setup. Make sure the plates don't block the door, so it opens and closes smoothly.

Secure the Plates

To attach the custom door sill plates to your Ford, start by cleaning the area. Use a mild cleaner or rubbing alcohol to get rid of any dirt or grease. This helps the glue stick better so the plates don't come off later.

After cleaning, line up the plates with the spots you marked earlier. Most door sill plates have sticky tape on the back. Peel off the film covering the sticky part, but be careful not to touch the edges. Press the plate onto the sill and push down evenly along its length.

You can use a heat gun to warm the adhesive a little, which can make it stickier.

If you're using screws, make sure they won't rust and work well with your car's materials. This way, the plates stay on longer, even in busy areas. Securing the plates this way makes your car look nicer and helps keep the sills from getting scratched.

Final Inspection

With the custom door sill plates securely installed, it's time to check everything thoroughly. This helps ensure everything looks and works as it should. Use this checklist to guide you through the process:

  1. Alignment Check: Look at how the plates line up. They should be straight and even on both sides of the car. If they're crooked, it might not look right and could cause wear and tear.
  2. Adhesive Bond: Press gently around the edges of the plates. They should be firmly in place with no loose corners or gaps. This ensures they last longer and stay in place.
  3. Surface Integrity: Check the plates for any scratches or dents. They should look smooth and match the car's interior.
  4. Functionality: Open and close the doors a few times. The plates should not block the doors or move when you use them.

People Also Ask

Are Custom Door Sill Plates Compatible With All Ford Models?

Custom door sill plates don't fit all Ford models. They need to match the model and year of your car. It's best to check with the car maker or a professional to make sure they will fit your specific Ford car.

Can I Install Custom Plates if I Have an Aftermarket Interior?

Yes, you can put custom plates in your car even if you've changed the inside parts. Just make sure the plates fit and can be attached properly. It's a good idea to check the maker's instructions or ask a professional for help.

Do Custom Door Sill Plates Affect the Vehicle's Warranty?

Custom door sill plates usually don't mess with your car's warranty if you put them on right and they don't hurt any parts. To be sure, check your warranty details or ask the car dealer.

How Do I Clean and Maintain Custom Door Sill Plates?

To clean and take care of custom door sill plates, wipe them gently with a soft cloth. For tough spots, use soapy water. Make sure to dry them completely so they don't get damaged. This keeps them looking nice and new!

Where Can I Purchase High-Quality Custom Door Sill Plates for My Ford?

You can buy custom door sill plates for your Ford from trusted car accessory stores or websites. Make sure they fit your car model and check what other buyers say about their quality. This helps ensure you get a product that lasts.

Justin

Hi, I'm Justin, a car enthusiast turned mechanic. The garage is my second home, where each engine and part tells a unique story. Seeing car owners frustrated with issues inspired me to start DIY Car Expert, offering reliable solutions to tackle problems with ease. 🚗✨

Recent Posts