To properly adjust rear wheel bearings on a classic Nissan, first gather essential tools including wrenches, a socket set, calipers, and a grease gun. Secure the car with the parking brake and wheel chocks, then lift with a hydraulic jack and stabilize using jack stands. Begin by loosening the castle nut and set the bearing preload, tightening the nut to 25-30 ft-lbs with a torque wrench. Ensure minimal play and absence of noise in the wheel. After reattaching brake components and securing all fasteners with the correct torque (60-80 Nm), conduct a test drive for any anomalies to confirm success. Further details enhance understanding.
Gather Necessary Tools
Before you start adjusting the rear wheel bearings on a classic Nissan, make sure you have all the tools you need. This helps keep the car in good shape and makes the job easier.
Here's what you'll need:
- Wrenches: Grab a set to fit different sizes. A torque wrench is especially useful to apply the right amount of force.
- Socket Set: Handy for dealing with various bolt sizes.
- Calipers: Use these to measure how much space is around the bearings. This helps you adjust them correctly.
- Bearing Grease and Grease Gun: Needed to keep the bearings well-lubricated.
- Floor Jack and Jack Stands: These let you lift and hold up the car safely, so you can work on the wheels.
- Rubber Mallet: Helps in loosening tight parts without causing damage.
Having everything ready before you begin saves time and helps you work smoothly.
Prepare the Vehicle
Get the Car Ready
Gather all your tools. Now, make sure the car is in a safe and steady position. This helps you stay safe and makes it easier to work on the rear wheel bearings.
1. Lock the Car in Place: Put the parking brake on tight. Place wheel chocks in front of and behind the front wheels. This stops the car from moving when you are working on the back wheels.
2. Lift the Car: Use a hydraulic jack to lift the back of the car. Check the owner's manual to find the right spots to place the jack. This prevents damage to the car's bottom.
After lifting, place sturdy jack stands under the rear axle or at the right lift spots to keep the car steady.
3. Check Your Workspace: Make sure the area around the car is free of clutter and garbage. Good lighting is important so you can see clearly, especially when checking and fixing parts.
Keep all your tools nearby for easy access.
Remove the Wheel
Start by lifting the car securely and make sure it is stable using jack stands. Check that the car won't move.
Find the nuts holding the wheel. Loosen them while the car is still on the ground, but don't take them off until the car is lifted.
Use a wrench to take off the nuts. This might be tough if the nuts are tight or rusty. Keep the nuts safe so you don't lose them.
Once the nuts are off, pull the wheel away from the hub. You might need to move it a bit to get it off if it's been on for a long time.
Look at the wheel and hub to see if there's any damage or dirt. This could help when adjusting the bearings later.
Store the wheel in a safe place so it doesn't get damaged.
Adjust the Bearings
To adjust the rear wheel bearings on a classic Nissan, follow these simple steps to keep things running smoothly:
- Loosen the Castle Nut: Start by loosening the castle nut on the axle. Don't make it too tight or too loose. This nut helps keep the wheel bearings in place.
- Set Bearing Preload: Once the nut is loosened, turn the wheel and slowly tighten the nut again. This helps the bearings sit right. Use a torque wrench to tighten it to the level your car's manual suggests, usually between 25-30 ft-lbs.
- Check for Play and Smoothness: After setting the preload, check the wheel by moving it back and forth. There should be minimal movement. Spin the wheel to see if it turns easily without making any grinding sounds.
Reassemble and Test
Once you've adjusted the rear wheel bearings, it's time to put everything back and test it. Start by placing the brake drum or disc rotor onto the hub. Make sure it lines up properly to keep the brakes working well.
Attach the brake caliper or drum with a torque wrench. Use the torque settings from the manufacturer, usually between 60 to 80 Nm for older Nissan models.
Tighten all the bolts and fasteners to the right specifications, so they don't come loose when driving.
After putting everything back together, lower the car from the jack stands. Tighten the lug nuts to between 90 to 110 Nm.
Take the car for a test drive in a safe area. Listen for any strange noises or vibrations that might mean something is wrong.
Check how the car handles and stops to make sure the adjustment worked. If there are any problems, go back and check your adjustments.
Proper assembly and testing help keep the rear wheel bearings of your classic Nissan in good shape.
People Also Ask
How Often Should Rear Wheel Bearings Be Checked on a Classic Nissan?
Check the rear wheel bearings on a classic Nissan every year or after driving 12,000 to 15,000 miles, whichever comes first. This helps keep the car running well and safe by catching any problems early.
What Are the Signs of Worn or Damaged Rear Wheel Bearings?
Worn or damaged rear wheel bearings can cause strange noises like humming, grinding, or rumbling from the wheels. You might also see uneven tire wear and feel the wheels becoming loose, which can make driving unsafe. Be sure to check them soon!
Can Improper Adjustment of Wheel Bearings Affect Vehicle Performance?
If wheel bearings are not set right, your car might shake more, tires can wear out unevenly, and it won't handle as well. This can also make the bearings break sooner, which is unsafe and can cost a lot to fix.
Are There Specific Symptoms if the Rear Wheel Bearings Are Too Tight or Loose?
If rear wheel bearings are too tight, they can get too hot. If they're too loose, the car might make a lot of noise, and the tires could wear out unevenly. This can make driving feel wobbly or unsafe.
What Safety Precautions Should Be Taken When Working on Wheel Bearings?
When fixing wheel bearings, make sure the car is safely lifted with jack stands. Wear gloves to protect your hands and safety glasses to shield your eyes from tools and tiny bits. This helps keep you safe while working.