To upgrade to braided brake lines on your Nissan, begin by gathering tools like metric wrenches and a torque wrench. These tools ensure accurate and safe installation. Park on a secure, flat surface and use a hydraulic jack for access. After inspecting and possibly replacing worn brake rotors and pads, disconnect the existing brake lines using proper tools. Install the new Teflon or PTFE braided lines, ensuring that fittings match manufacturer specifications. Bleed the brake system thoroughly to remove air bubbles, starting from the rear passenger side. Conduct a final brake test to guarantee a secure and responsive upgrade. Additional insights await.
Understand Braided Brake Lines
Braided brake lines are a popular choice for car lovers. They are better than regular rubber brake hoses for a few reasons. Made with a Teflon or PTFE tube wrapped in stainless steel, they last longer and work well.
One big plus is they don't expand under pressure like rubber hoses. This means your brakes will feel firm and respond well.
When putting in braided brake lines, plan and follow these steps. Check that they fit your Nissan by looking at the specs. Pick the right size and length to avoid problems.
Before installing, look over the lines for any flaws or damage. Make sure all connections are tight to stop leaks. Follow the maker's instructions for how tight to make them.
Bleed the brake system to get rid of air for the best results.
Gather Necessary Tools
To switch to braided brake lines on your Nissan, you'll need some basic tools for the job. Start with a set of metric wrenches to loosen and tighten the fittings.
If you need to adjust the brake lines, a flaring tool comes in handy. Use a torque wrench to make sure all connections are tight enough and won't leak.
A brake fluid bleeder kit helps get rid of air in the system after you install the new lines. This keeps your brakes working well.
A brake line bender is useful for shaping the lines without bending them the wrong way, which makes them easier to install. Line clamps stop brake fluid from leaking while you're working on the swap.
Stainless steel braided lines are stronger and don't expand like rubber hoses. But be careful with them to avoid damaging the braided cover.
Having good tools makes the job easier and helps avoid problems.
Prepare Your Nissan
Get Your Nissan Ready
To start putting in braided brake lines, first park your Nissan on a flat surface. Put the parking brake on and place some blocks behind the back tires to keep it from moving. Safety is key, so follow these steps to reduce risks.
Check the brakes well. Look at the brake fluid to see if it's at the right level and in good shape. If it looks dark or dirty, plan to change it. Also, look at the brake rotors and pads. If they are worn out, replace them. This check makes sure the new brake lines work well.
Use a hydraulic jack to lift the car and put it on jack stands. Take off the wheels so you can easily reach the brake lines. Make sure you have all the tools you need close by.
These steps set you up for a successful installation, improving how your Nissan runs.
Remove Old Brake Lines
Taking out the old brake lines is a key part of improving your Nissan's brakes. You need to be careful and use the right method so the hydraulic system stays safe. Start by figuring out if the current brake lines are rubber or steel. This helps you know which tools and methods to use.
Gently take the brake lines off the calipers and the master cylinder without harming nearby parts.
Here's what you'll need:
- Tools: A set of wrenches, line wrenches, and a brake line cutter.
- Brake fluid: Drain it completely before you start to keep it from spilling.
- Connection points: Find where the brake lines connect to the calipers and master cylinder.
- Corrosion check: Look for rust or wear on the brake lines as this can make removal tough.
- Labeling: Mark each line so you know where they go when you put them back.
Once the old lines are out, clean the contact areas well. This gets things ready for the new lines.
Install Braided Brake Lines
To put braided brake lines on your Nissan, follow these steps for a smooth and safe ride.
First, line up the new braided lines with the current brake setup. Make sure each line follows the old path to prevent any extra stress. These braided lines are made from stainless steel, so they last longer and don't stretch under pressure, giving you better brake control.
Attach each line using the right fittings. Tighten them properly to stop any leaks. Use a torque wrench to match the settings given by the manufacturer.
Don't forget about the clips and brackets. They help reduce shaking and wear over time.
Check the braided lines often for any wear or damage, especially if you drive in tough conditions. Make sure the outer layer is still in good shape, as it protects the inside part.
Bleed the Brake System
To make sure your brakes work well and safely after putting in new braided brake lines, you need to remove any air trapped in the brake lines. Air in the lines can make the brake pedal feel soft and reduce how well the brakes work.
First, fill the brake fluid reservoir with fresh fluid to the recommended level. This helps stop more air from getting into the system.
How to Remove Air from Brake Lines:
- Start with the rear passenger wheel: This is usually the farthest from the brake fluid reservoir and helps release pressure thoroughly.
- Attach a clear tube: Connect it to the bleeder valve so you can see air bubbles and keep the fluid clean.
- Get someone to help: They can press the brake pedal to build up pressure while you manage the bleeder valve.
- Open the bleeder valve slightly: This lets out brake fluid and air. Close it before releasing the brake pedal.
- Repeat until no bubbles appear: Keep doing this until only clear fluid comes out, showing all air is gone.
These steps improve how your Nissan brakes, making them more reliable.
Test the New Brake Lines
After putting in the new braided brake lines and getting rid of any air bubbles, make sure they work well.
First, do a simple check while the car isn't moving. Push the brake pedal down hard and see how it feels. The pedal should be firm and not go down much. Look around the connections for any leaks.
Next, take the car for a drive in a safe area. Start slow and test the brakes in different ways. Check how far it takes to stop and how the pedal feels. Braided lines usually make the brakes feel better and more steady.
Try out real-life situations like quick stops and turning corners to see how strong the brakes are. Compare this to how the brakes felt before the new lines. Write down any differences.
If something seems off, check the installation again, making sure everything is tight and secure. This way, you know the new brake lines are working as they should.
People Also Ask
What Are the Benefits of Upgrading to Braided Brake Lines?
Upgrading to braided brake lines makes your car stop better because they make the brake pedal feel more responsive and reduce brake fade. They are safer and stronger than regular rubber lines, so they don't stretch under pressure, helping your brakes work better.
How Much Does It Typically Cost to Upgrade Brake Lines?
Upgrading brake lines usually costs between $100 and $300. The price depends on the type of brake line you pick and how much the labor charges are. If you want to save money, you can try installing them yourself, but make sure they fit your car!
Are Braided Brake Lines Legal for Street Use in All States?
Braided brake lines aren't legal for street use everywhere. Each state has different rules, so it's important to check local laws before using them. Make sure they meet safety standards to keep your car safe and legal on the road.
Can I Upgrade Brake Lines Myself or Should I Hire a Professional?
Yes, you can change brake lines yourself if you have some mechanical skills and the right tools. But, it's safer to ask a professional for advice. If not done correctly, it can be dangerous and cause car problems. Safety is most important!
How Often Should Braided Brake Lines Be Inspected or Replaced?
Check braided brake lines once a year to keep them working well and safe. If you see signs like wear, fraying, or leaks, it's time to change them. Regular checks and timely changes help keep your brakes reliable and working right.