How to Change Windshield Wipers Toyota Corolla?

How to Change Windshield Wipers Toyota Corolla? To change windshield wipers on a Toyota Corolla:

Measure the old wipers for size.
Select matching replacements.
Lift the wiper arms.
Press the tab to remove old wipers.
Click new ones into place.

Avoid windshield damage during the process.

Table of Contents

Identifying Wiper Size

To replace windshield wipers on a Toyota Corolla, finding the right size is important. Use the car’s manual to find the correct size. If the manual is lost, auto parts stores or their websites can help by entering the car’s details. Usually, a Corolla needs a 26-inch wiper for the driver side and a 16-inch for the passenger side, but check to make sure because sizes can change with the model year.

Measuring the old wipers with a tape measure is another way to find the right size. However, confirm this size with the manual or online to be sure it’s correct. Accuracy is important for the wipers to work well.

When buying new wipers, note there are different types. While the right size is important, consider choosing a type that performs better or lasts longer, especially in bad weather. This not only ensures the correct size but also improves driving in all conditions.

Removing Old Wipers

To remove the old wipers from your Toyota Corolla, follow these steps:

Lift the wiper arms from the windshield until they stay up by themselves, exposing where the wiper blade connects to the arm.
Look for a small tab or lever at the connection point and press or slide it to detach the wiper blade. If it doesn’t come off easily, gently wiggle it while pulling down.
Be careful not to force it too much to avoid damaging the arm. You’re only removing the blade, not the whole arm.
If your model has a different mechanism for releasing the blade, like a button or a different latch, check closely to use the right method. Consult your Corolla’s manual if unsure.
After removing the blade, carefully lower the wiper arm back to the windshield to prevent damage.

This process is straightforward and ensures your Toyota Corolla is ready for new wiper blades for clear visibility.

Choosing Replacement Wipers

After removing the old wipers from your Toyota Corolla, it’s important to choose the right replacements for clear visibility. You need to match the size and attachment style of your car. To find the correct size, check the car’s year in the owner’s manual or online.

There are three main types of wiper blades: conventional, beam, and hybrid. Conventional blades are common and affordable. Beam blades have a sleek design that reduces wind lift and gives a uniform wipe. Hybrid blades mix traditional durability with the aerodynamic design of beam blades.

Wiper blades are sold by length. Make sure to choose the correct length to avoid a blade that’s too long or too short for your windshield. Your Corolla may need different sizes for the driver and passenger sides, so check those details.

Also, consider the climate you drive in. For areas with heavy snowfall, choose blades designed for winter to avoid snow and ice buildup and maintain clear visibility.

Installing New Wipers

To install new wipers on your Toyota Corolla, follow these steps:

Lift Wiper Arms:

Gently lift the wiper arms from the windshield until they stay up on their own. Avoid letting them snap back to prevent damage.

Remove Old Wiper Blades:

Press the small tab at the wiper blade and arm connection to release the blade. Slide the blade down or up (depending on your model) to remove it. Note how the old blade was attached to help with the new blade installation.

Attach New Wiper Blades:

Insert the new wiper blade into the arm at the same end where the old one was removed. Slide it in the opposite direction of removal until it clicks in place. Make sure it’s secure.

Test Wipers:

Carefully lower the arms back to the windshield. Turn on the vehicle and test the new wipers to ensure they work correctly without streaking. This is important for safe driving in bad weather.

Maintenance Tips

To maintain your Toyota Corolla’s wiper blades and improve visibility in bad weather, follow these steps:

Clean your windshield and wiper blades every time you refuel. Use a soft cloth or sponge with windshield washer fluid. Lift the blades to clean the whole surface.
Check your wiper blades often for wear or damage like cracks, tears, or stiffness. Replace them every 6 to 12 months, depending on their condition and your area’s weather.
Use your wipers with windshield washer fluid to keep the rubber soft and prevent sticking to the glass.
In winter, remove ice or snow from your windshield by hand before using wipers. When parked during snowfall, pull your wipers away from the windshield to keep them from freezing to the glass.

Conclusion

Now that you’ve changed your Toyota Corolla’s windshield wipers, you’re ready for any weather. Keeping your new wipers clean and checking them for any damage is important. This way, they’ll work well and last longer.

Remember to always make sure you can see clearly while driving. Enjoy the clear view!