To replace Toyota Corolla windshield wipers:
- Lift the wiper arms.
- Press the tab to release the old blades.
- Attach new ones by sliding until they click.
- Lower the arms back.
No special tools are needed.
Gather Your Tools
To remove your Toyota Corolla's windshield wipers, collect these tools:
- A medium-sized flathead screwdriver for prying off wiper caps.
- A socket wrench (preferably with 10mm to 14mm sockets) for unscrewing the nuts.
- Gloves and safety glasses for protection.
This setup helps you remove the wipers easily and safely.
Locate the Wiper Blades
First, make sure your Toyota Corolla is parked on a level surface and turned off for safety.
To find the windshield wipers, look at the bottom of the windshield in front of both the driver's and passenger's side. You'll see the wiper blades resting against the windshield.
The metal parts extending from the base of the windshield to the blades are the wiper arms. Each arm is connected to a hinge that allows it to move.
Knowing these parts helps with removing the wipers and future maintenance.
Lift the Wiper Arms
CURRENT SUBTOPIC: 'Lift the Wiper Arms'
To lift the wiper arms on your Toyota Corolla, first, turn off the car and take out the keys. This stops the wipers from moving by mistake. Handle the wiper arms carefully. They are made to stay flat against the windshield and may resist a bit when you try to lift them. Lift them gently to avoid damage.
Hold the wiper arm near where it connects, as this part is stronger. Slowly lift it until it stays up by itself. If it doesn't stay up, carefully pull it a bit more until it locks in position. This prevents it from snapping back and causing damage.
Here's a simple table of the steps:
| Step | Action | Note |
|---|---|---|
| 1 | Turn off the car | For safety |
| 2 | Hold the wiper arm | Near the hinge |
| 3 | Lift it gently | Until it locks |
Disconnect the Blades
To remove the blades from your Toyota Corolla's windshield wipers, find the small tab or button where the blade connects to the arm. Press this tab or button to unlock the blade, then slide or pivot it off, depending on your model.
Here are some tips:
- Wear gloves for a better grip.
- Press the tab or button gently to avoid breaking it.
- Hold the wiper arm to prevent it from hitting the windshield.
- Remember how the blade fits onto the arm for easier reattachment.
Removing the blades is easy once you know how. Be patient and careful not to rush, ensuring you press the release mechanism correctly to avoid damaging your car.
Reassemble if Necessary
To reattach the blades to your Toyota Corolla's windshield wipers, follow these steps.
First, take the wiper blade, whether it's new or the same one after maintenance. Be careful with the wiper arm as it can snap back.
Pull the arm away from the windshield gently and hold it. Align the wiper blade with the hook on the wiper arm. Press or slide the lever or button on the blade to attach it to the arm.
Make sure the blade is secure and not loose. Gently lower the wiper arm back to the windshield, guiding it softly. Repeat for the other blade if needed.
Conclusion
You've now taken off the windshield wipers from your Toyota Corolla, great job! Remember, you just need the right tools, find the wiper blades, lift up the arms, and carefully take the blades off.
If you're putting them back on, just do everything backwards. It's easy and quick to do.
So, when it's time to change your wipers again, you'll know just what to do. Keep this guide close by, and you'll always be ready.