To reset the maintenance light on a 2017 Toyota Tacoma, turn the ignition off and press and hold the trip meter button. Then turn the key to the “On” position while continuing to hold the trip meter button.
Release the button when the display shows zeros. Owning a 2017 Toyota Tacoma means ensuring that regular maintenance is performed and the maintenance light is reset promptly. If you find yourself in a situation where the maintenance light needs to be reset, you can follow these simple steps to do so.
This will help ensure that your truck continues to operate at peak performance. Resetting the maintenance light is an essential part of vehicle ownership, and by following the specific steps, you can keep your Tacoma running smoothly and efficiently.
Step-by-step Guide
Are you tired of seeing the maintenance light on your 2017 Toyota Tacoma constantly reminding you of impending service? Fret not, because we have got you covered with this step-by-step guide on how to reset the maintenance light. By following these simple instructions, you can easily reset the light and ensure your vehicle remains in top condition. Let’s dive right in!
Step 1: Prepare Your Vehicle
- Ensure your vehicle is parked in a safe and well-lit area.
- Make sure the gear shift is in the Park position for automatic transmissions or in Neutral for manual transmissions.
- Turn off all accessories such as the radio, air conditioning, and headlights.
Step 2: Access The Dashboard Buttons
Locate the dashboard area and identify the buttons used to navigate the vehicle’s settings.
Step 3: Turn The Ignition On
Insert the key into the ignition and turn it to the accessory power position, without starting the engine. This position powers the vehicle’s electrical systems while the engine remains off.
Step 4: Locate The Trip Button
Find the trip button on the dashboard. It is usually located near the speedometer or tachometer.
Step 5: Reset The Maintenance Light
- Press and hold down the trip button.
- While holding the trip button, turn the ignition key to the ON position.
- Continue holding the trip button until the maintenance light starts flashing and eventually turns off. This indicates that the light has been successfully reset.
- Release the trip button and turn off the ignition.
- Turn the ignition back on to verify that the maintenance light no longer appears.
Credit: carbuzz.com
Common Mistakes To Avoid
When resetting the maintenance light on a 2017 Toyota Tacoma, it’s crucial to avoid common mistakes that could lead to issues or difficulties in the process. By being aware of these potential pitfalls, you can ensure a smooth and successful reset of the maintenance light.
Skipping Steps
One of the most common mistakes when resetting the maintenance light on a 2017 Toyota Tacoma is skipping essential steps. Skipping crucial steps in the process can lead to incomplete reset attempts or even damage to the vehicle’s systems. Ensure that you carefully follow each step in the reset procedure to guarantee a successful outcome.
Incorrect Button Pressing
Another common mistake to avoid is pressing the wrong buttons during the reset process. Incorrectly pressing the buttons on the dashboard can result in the maintenance light not resetting as intended. Refer to the vehicle’s manual or reliable online sources to confirm the correct buttons to press for the reset procedure.
When To Reset The Maintenance Light
Resetting the maintenance light on a 2017 Toyota Tacoma is a quick and simple process. Just follow the easy steps outlined in your vehicle’s manual to clear the light and ensure your truck is running smoothly.
When to Reset the Maintenance LightAfter Regular Maintenance It is important to reset the maintenance light after regular servicing.| Step | Action |
|---|---|
| 1 | Turn ignition key to “ON” position. |
| 2 | Press trip meter button until trip A or B is displayed. |
| 3 | Turn key to off position while holding trip meter button. |
| 4 | Turn key back to “ON” position while holding the trip meter button. |
| 5 | Wait until zeros replace the dashes on the trip display. Release trip meter button. |
| 6 | Start vehicle to ensure the maintenance light is reset. |
- Check oil levels.
- Inspect for any leaks.
- Ensure all maintenance tasks were completed.
Credit: www.youtube.com
Credit: www.tacomaforum.com
Frequently Asked Questions Of How To Reset Maintenance Light On 2017 Toyota Tacoma
How Do I Reset The Maintenance Light On My 2017 Toyota Tacoma?
To reset the maintenance light on your 2017 Toyota Tacoma, follow these simple steps:
1. Turn the engine switch to the “ON” position, but do not start the engine. 2. Locate the trip meter reset button and press it until “Trip A” or “Trip B” is displayed on the screen. 3. Turn the engine switch off, then press and hold the trip meter reset button. 4. While holding the button, turn the engine switch to the “ON” position. 5. Continue holding the trip meter reset button until the maintenance light starts flashing and then turns off. 6. Release the trip meter reset button. The maintenance light should now be reset.
How Often Should I Reset The Maintenance Light On My 2017 Toyota Tacoma?
It is recommended to reset the maintenance light on your 2017 Toyota Tacoma after each scheduled maintenance service. This ensures that the light accurately reflects the next service interval and helps you stay on top of your vehicle’s maintenance needs.
What Does It Mean When The Maintenance Light Comes On In A 2017 Toyota Tacoma?
When the maintenance light comes on in your 2017 Toyota Tacoma, it means that there is a scheduled maintenance service that needs to be performed. It is important not to ignore this light, as regular maintenance helps keep your vehicle running smoothly and can prevent potential issues down the road.
Conclusion
Resetting the maintenance light on your 2017 Toyota Tacoma is a simple task. By following these steps, you can easily maintain your vehicle’s performance and longevity. Remember to keep up with regular maintenance to ensure your truck stays in top condition.
Drive safe and enjoy the road ahead!