To reset the maintenance light on a 2018 Toyota 4Runner, start the vehicle and make sure the odometer is displaying the total mileage. Turn the ignition off.
Then, press and hold the trip meter reset button, turn the ignition to the on position, and continue to hold the button until the maintenance light blinks and then turns off. Release the button and the maintenance light should be reset.
If you drive a 2018 Toyota 4Runner, it’s important to know how to reset the maintenance light when necessary. Following the proper steps can ensure that you maintain your vehicle’s performance and functionality.
By taking a few simple actions, you can reset the maintenance light and keep your 4Runner in top condition. Let’s explore the process of resetting the maintenance light on the 2018 Toyota 4Runner in detail.
Credit: www.toyotaofcedarpark.com
Identifying The Maintenance Light
Before you can reset the maintenance light on your 2018 Toyota 4Runner, it’s crucial to know where to locate the maintenance light indicator in the vehicle.
Locating The Maintenance Light Indicator
The maintenance light indicator is typically situated on the dashboard. It is a small symbol that resembles an engine. The location may vary slightly depending on the vehicle model, but it is usually found near the speedometer or tachometer.
Once you have identified the maintenance light indicator, you can proceed with the steps to reset it. Refer to your vehicle’s manual for specific instructions or follow our guide on how to reset the maintenance light on your 2018 Toyota 4Runner.
Credit: www.howtoautomotive.com
Resetting The Maintenance Light
In this section, I will provide a step-by-step guide on how to reset the maintenance light on a 2018 Toyota 4Runner.
It’s important to reset the maintenance light after completing a maintenance task on your vehicle to ensure accurate tracking of the maintenance schedule. Follow the instructions below to reset the maintenance light and keep your 4Runner in optimal condition.
Step-by-step Guide
- Enter your 4Runner and ensure the odometer display shows the total mileage.
- Turn the ignition switch to the “OFF” position.
- Press and hold the trip meter reset button located on the instrument panel.
- While holding the trip meter reset button, turn the ignition switch to the “ON” position, but do not start the engine.
- Continue holding the trip meter reset button until the maintenance light starts flashing and eventually turns off, indicating the reset is complete.
- Release the trip meter reset button.
- Turn the ignition switch to the “OFF” position.
- Start your 4Runner to ensure the maintenance light is no longer illuminated.
Ensuring The Reset
To confirm that the maintenance light has been successfully reset, turn off the 4Runner and then restart it. Verify that the maintenance light does not reappear, indicating that the reset was effective.
Alternative Methods
Alternative Methods to Reset Maintenance Light on 2018 Toyota 4Runner
Using The Odometer Button
Turn the key to the “on” position without starting the engine.
- Press and hold the trip reset button on the odometer.
- While holding the button, turn the key to the off position.
- Continue holding the trip reset button and turn the key back to the on position.
- Release the trip reset button when the maintenance light flashes and resets.
Consulting The Owner’s Manual
Refer to the owner’s manual for specific instructions tailored to your Toyota 4Runner.
- Locate the maintenance light reset procedure section in the manual.
- Follow the detailed steps provided to reset the maintenance light.
- Ensure to accurately carry out the reset process as outlined in the manual.
Credit: m.youtube.com
Frequently Asked Questions For How To Reset Maintenance Light On 2018 Toyota 4runner
How Do I Reset The Maintenance Light On My 2018 Toyota 4runner?
To reset the maintenance light on your 2018 Toyota 4Runner, simply follow these steps:
1. Insert the key into the ignition and turn it to the “ON” position without starting the engine. 2. Locate the small, black “Odo/Trip” button on the instrument panel. 3. Press and hold the “Odo/Trip” button while simultaneously turning the key to the “OFF” position. 4. Release the “Odo/Trip” button, and then turn the key back to the “ON” position. The maintenance light should now be reset.
Why Is The Maintenance Light On In My 2018 Toyota 4runner?
The maintenance light in your 2018 Toyota 4Runner comes on to remind you that it is time for scheduled maintenance. This could include an oil change, tire rotation, or other routine services. It is important not to ignore the maintenance light, as neglecting to address these services could result in further damage to your vehicle.
Can I Reset The Maintenance Light Without Going To The Dealership?
Yes, you can reset the maintenance light on your 2018 Toyota 4Runner without going to the dealership. By following the simple steps outlined in this guide, you can reset the maintenance light yourself. However, it is still advisable to have your vehicle serviced regularly by a qualified technician to ensure its optimal performance and longevity.
Conclusion
Resetting the maintenance light on your 2018 Toyota 4Runner is a simple process that ensures your vehicle stays in top condition. By following the steps outlined you can easily take control of this maintenance task. Keep your 4Runner running smoothly and efficiently with these easy-to-follow instructions.