How to Reset Maintenance Required on Toyota Corolla 2018? To reset the maintenance required light on a Toyota Corolla 2018, start by locating the OBD-II port under the driver’s side dashboard. Turn the ignition on, then press and hold the trip meter button. Cycle through settings by releasing and pressing the button. Confirm the reset by checking for the maintenance light to no longer be illuminated. For a detailed guide, including accessing the OBD-II port and specific steps involved, follow the outlined process.
Mastering these steps will help you efficiently reset the maintenance required light on your Toyota Corolla 2018. Unlock the full procedure by following the step-by-step instructions.
Step 1: Locate the OBD-II Port
To locate the OBD-II port in your Toyota Corolla 2018, start by looking beneath the dashboard on the driver’s side. The OBD-II port is typically located near the steering column and is easily accessible without the need for any tools.
It is a standardized diagnostic port used for connecting diagnostic tools or scanners to the vehicle’s onboard computer system. The OBD-II port in the Toyota Corolla 2018 is crucial for performing maintenance tasks, troubleshooting issues, and resetting maintenance required notifications.
Once you have located the OBD-II port, you can proceed with connecting your OBD-II scanner or diagnostic tool to the port. Ensure that the vehicle is in a stationary position with the engine off before plugging in the OBD-II device.
Properly connecting the OBD-II scanner will allow you to communicate with the vehicle’s computer system and access information such as diagnostic trouble codes, vehicle health status, and maintenance notifications.
Comprehending the position and purpose of the OBD-II port is crucial for the effective maintenance and repair of your 2018 Toyota Corolla.
Step 2: Turn the Ignition On
After locating the OBD-II port in your Toyota Corolla 2018, the next step is to turn the ignition on. This step is crucial in order to access the vehicle’s diagnostic system and reset the maintenance required light.
To begin, ensure your vehicle is parked safely with the gear in the ‘Park’ position. Insert the key into the ignition and turn it clockwise until the dashboard lights come on. You should see various indicators light up, including the battery, oil, and check engine lights.
Step 3: Press and Hold the Trip Meter Button
Pressing and holding the trip meter button activates the next step in resetting the maintenance required light on your Toyota Corolla 2018. This action triggers the system to move into the mode where you can cycle through settings to reset the maintenance light.
To guide you through the process effectively, below is a table outlining the steps to follow:
Step | Action |
---|---|
1 | Ensure the ignition is turned off. |
2 | Press and hold the trip meter button. |
3 | While holding the button, turn the ignition key to the “ON” position. |
Step 4: Cycle Through Settings
Continuing the maintenance light reset process on your Toyota Corolla 2018 involves navigating through various settings to complete the cycle. After pressing and holding the trip meter button, you will notice the display changing.
To cycle through the settings, you will need to release the trip meter button briefly and then press it again. Each press of the button will move you through different settings until you reach the one that allows you to reset the maintenance light.
It’s essential to pay close attention to the display as you cycle through, ensuring you don’t miss the option needed to reset the maintenance light. By following this step carefully, you will be able to access the specific setting required to complete the maintenance light reset process efficiently.
Once you have cycled through to the correct setting, you will be ready to proceed with confirming the maintenance reset.
Step 5: Confirm Maintenance Reset
To finalize the maintenance light reset on your Toyota Corolla 2018, the next step is to confirm the reset process. Once you have successfully cycled through the settings and selected the ‘Reset’ option, the maintenance light should now be flashing, indicating that the reset is in progress.
At this point, it is crucial to verify that the maintenance required light has indeed been reset to ensure that the maintenance schedule is accurately reflected.
To confirm the maintenance reset, turn the ignition off and then back on. Check the dashboard to see if the maintenance light is no longer illuminated.
Additionally, you can start the engine to confirm that the light does not reappear. If the maintenance light remains off and does not reappear after starting the engine, it indicates that the reset was successful, and the maintenance required notification has been reset on your Toyota Corolla 2018.
Step 6: Turn Off the Ignition
After confirming that the maintenance light has been reset, proceed to turn off the ignition of your Toyota Corolla 2018. This step is essential to ensure that the changes made during the maintenance reset process are properly saved and implemented. Follow these simple steps to turn off the ignition:
Step | Instructions |
---|---|
1 | Make sure your vehicle is in park or neutral. |
2 | Press the brake pedal. |
3 | Turn the ignition switch to the “Off” position. |
Conclusion
Resetting the maintenance required light on a Toyota Corolla 2018 is a simple process. It can be done by locating the OBD-II port, turning the ignition on, pressing and holding the trip meter button, cycling through settings, confirming the maintenance reset, and turning off the ignition.
By following these steps, you can easily reset the maintenance reminder on your Toyota Corolla 2018.