To reset the maintenance required on a Toyota Corolla 2020: Locate the Odometer Button near the speedometer, turn off the engine, press and hold the button, turn the ignition to the 'On' position, and continue holding until the light stops flashing. This process ensures successful maintenance light reset.
Locate the Odometer Button
To begin resetting the maintenance on a Toyota Corolla 2020, the first step is to locate the Odometer Button on the dashboard. The Odometer Button is typically situated near the speedometer and tachometer, and it is used to navigate through the different settings and functions displayed on the dashboard. Once you have located the Odometer Button, make sure the vehicle is turned off to avoid any mishaps during the resetting process.
When you locate the Odometer Button, you will notice that it has a few different functions, including toggling between the trip meter and the odometer. To access the maintenance settings, you will need to press and hold the Odometer Button while turning the engine switch to the 'On' position. This will initiate the maintenance reset procedure, allowing you to clear the maintenance required light and start fresh with your maintenance schedule. Familiarizing yourself with the location and function of the Odometer Button is crucial for efficiently resetting the maintenance on your Toyota Corolla 2020.
Turn Off the Engine
Ensuring the engine of your Toyota Corolla 2020 is turned off is the next crucial step in the maintenance resetting process. Before proceeding with resetting the maintenance light, it is essential to switch off the engine to prevent any mishaps during the procedure. Turning off the engine will also ensure that the reset is done accurately without any interruptions.
To turn off the engine of your Toyota Corolla 2020, simply shift the gear into park or neutral, apply the parking brake, and then turn the ignition key to the off position. Wait for a few moments to allow the engine to completely power down before continuing with the maintenance reset process.
Press and Hold Odometer Button
After ensuring the engine of your Toyota Corolla 2020 is turned off, the next step in resetting the maintenance involves pressing and holding the odometer button.
Locate the odometer button on the dashboard, usually situated near the speedometer. Once you have found it, press down on the button and hold it firmly.
While holding the odometer button, turn the engine switch to the “On” position without starting the engine. You will notice the dashboard lights illuminate, indicating the car is in accessory mode.
Continue holding the odometer button until the maintenance required light on the dashboard starts flashing. This flashing light signifies that the maintenance reset process is underway.
Release the odometer button once the light stops flashing. At this point, the maintenance required light should be successfully reset, and you can restart your Toyota Corolla 2020 knowing the maintenance reminder has been cleared.
Turn Ignition to On Position
With the engine switch in the 'On' position and the odometer button held down, the next step in resetting the maintenance on a Toyota Corolla 2020 involves turning the ignition key to activate the electronic systems.
Once the odometer button is securely pressed, move the key into the ignition and turn it to the 'On' position without starting the engine. This action will power up the vehicle's electronics, preparing it for the maintenance reset procedure. It is crucial to ensure that the key is fully turned and that all warning lights on the dashboard illuminate.
Continue Holding Odometer Button
To proceed with the maintenance reset process on your Toyota Corolla 2020, maintain pressure on the odometer button as you progress to the next step. Continuing to hold the odometer button is crucial for ensuring that the reset procedure is executed successfully. This step indicates to the vehicle's system that you are actively engaged in the maintenance reset process.
To emphasize the importance of holding the odometer button, consider the following points in the table below:
| Point 1 | Point 2 | Point 3 |
|---|---|---|
| Maintain pressure | Ensure consistency | Follow instructions |
Reset Maintenance Light
Resetting the maintenance light on your Toyota Corolla 2020 is a straightforward process that ensures your vehicle's system is up to date with its maintenance schedule.
When the maintenance light illuminates on your dashboard, it indicates that it's time for a regular service check.
To reset the maintenance light, start by turning the ignition key to the 'On' position without starting the engine. Locate the trip reset button on the dashboard and press it until you see the odometer reading on the display.
Next, turn the ignition key back to the 'Off' position. Press and hold the trip reset button again while turning the key back to the 'On' position. Continue holding the button until the maintenance light turns off, indicating that the reset is complete.
This simple process ensures that your Toyota Corolla 2020 is ready for its next scheduled maintenance without any hassle.
Conclusion
In conclusion, resetting the maintenance required light on a Toyota Corolla 2020 is a simple process that can be done by following a few easy steps.
By locating the odometer button, turning off the engine, and holding the odometer button while turning the ignition to the on position, you can successfully reset the maintenance light.
This quick and easy procedure will ensure your vehicle is properly maintained and running smoothly.