How to Reset Maintenance Light on Toyota

Written by Rimi in Toyota

How to Reset Maintenance Light on Toyota? To reset the maintenance light on a Toyota, insert the key into the ignition and turn it to the “ON” position without starting the engine. Ensure the odometer is set to “TRIP A.” Turn off the ignition, press and hold the trip reset button, then turn the ignition back to “ON.” Keep holding the button until the odometer reads “000000” and the maintenance light turns off. This process may vary slightly depending on the model and year.

General Steps to Reset the Maintenance Light

While specific steps can vary between models and years, the general process to reset the maintenance light on a Toyota involves the following steps:

  1. Turn the Ignition On: Insert the key into the ignition and turn it to the “ON” position without starting the engine.
  2. Set the Odometer: Ensure the odometer is set to display the total mileage (not a trip meter).
  3. Turn Off the Ignition: Turn the key to the “OFF” position.
  4. Press and Hold the Odometer Button: Press and hold the odometer reset button.
  5. Turn the Ignition on Again: While holding the button, turn the ignition back to the “ON” position. Continue to hold the button.
  6. Wait for the Light to Blink and Turn Off: The maintenance light will blink and then turn off. Release the button.

Resetting the Maintenance Light by Model and Year

Toyota Camry (2018-2023)

  1. Start with the vehicle off.
  2. Press the “Start” button twice without pressing the brake to enter accessory mode.
  3. Navigate to the “Settings” menu using the steering wheel controls.
  4. Select “Maintenance Reset” and confirm the reset.

Toyota Corolla (2014-2023)

  1. Turn the ignition to the “ON” position.
  2. Ensure the odometer is set to “TRIP A.”
  3. Turn off the ignition.
  4. Press and hold the trip reset button while turning the ignition back to “ON.”
  5. Hold until the maintenance light turns off.

Toyota RAV4 (2013-2023)

  1. Start with the ignition off.
  2. Press the “Start” button twice without pressing the brake.
  3. Use the directional pad on the steering wheel to navigate to the “Settings” menu.
  4. Select “Maintenance Reset” and confirm.

Toyota Tacoma (2016-2023)

  1. Turn the ignition to the “ON” position.
  2. Set the odometer to “TRIP A.”
  3. Turn off the ignition.
  4. Press and hold the trip reset button while turning the ignition back to “ON.”
  5. Continue holding until the light turns off.

Common Issues and Troubleshooting

  • Light Doesn’t Turn Off: Ensure you are holding the odometer button throughout the process. Verify the odometer is set to the correct display.
  • Light Comes Back On: This may indicate that the reset was not successful, or there is a pending maintenance issue that needs addressing.

FAQs

Why does the maintenance light come on?

    The light is a reminder for scheduled maintenance, typically every 5,000 miles.

    Can I reset the maintenance light myself?

      Yes, the process is straightforward and can be done without professional assistance.

      Will resetting the light void my warranty?

        No, resetting the light does not affect your vehicle’s warranty.

        What if the light comes on before the scheduled service?

          It may be due to a previous reset not being performed correctly. Check your vehicle’s service records.

          Do I need to reset the light after every oil change?

            Yes, it’s recommended to reset the light after each service to maintain accurate reminders.

            Recent Posts