How to Reset Toyota Highlander Maintenance Light Push Button Start? To reset the maintenance light on a Toyota Highlander with a push button start, turn the ignition on and press the “Trip” button until the odometer displays “Trip A.” Then, turn the ignition off and press and hold the “Trip” button while turning the ignition back on to reset the maintenance light.
Owning a Toyota Highlander comes with its own set of responsibilities, including the regular maintenance of your vehicle. One of the routine tasks you’ll encounter is resetting the maintenance light. Fortunately, if you have a Toyota Highlander with a push button start, the process is relatively simple.
By following a few easy steps, you can quickly reset the maintenance light without having to visit a dealership or automotive service center. This guide will walk you through the exact process to reset the maintenance light on your Toyota Highlander with push button start, ensuring that your vehicle stays in top condition.
Credit: www.edmunds.com
Step-by-step Guide To Resetting The Maintenance Light
Check If The Maintenance Light Is On
If the maintenance light is illuminated, it’s time to reset it to ensure your Toyota Highlander continues to run smoothly.
Press The Start/stop Button Twice
Press the start/stop button twice without pressing the brake pedal to turn the vehicle on without starting the engine.
Access The Maintenance Menu
Use the trip meter button to navigate to the maintenance menu on the vehicle’s dashboard.
Select ‘reset’
Once in the maintenance menu, select the ‘Reset’ option to indicate that you want to reset the maintenance light.
Confirm The Reset
Confirm the reset by pressing and holding the trip meter button until you see the maintenance light blink and then turn off.
Credit: m.youtube.com
Resetting The Maintenance Light Without A Menu
Resetting the maintenance light on a Toyota Highlander with push-button start is essential to keep track of the vehicle’s service needs. However, there are instances when you need to reset the maintenance light without access to the main menu. Follow these simple steps to reset the maintenance light without the use of a menu.
Turn On The Ignition
First, press the “Engine Start-Stop” button once without touching the brake pedal. This will activate the accessory mode and the vehicle’s lights and radio will turn on.
Press And Hold The Trip Odometer Button
After turning on the ignition, locate the trip odometer reset button near the speedometer. Press and hold the trip odometer reset button until the maintenance light starts flashing.
Turn Off The Ignition
Once the maintenance light starts flashing, turn off the ignition by pressing the “Engine Start-Stop” button again without touching the brake pedal. This will turn off the vehicle’s lights and radio.
Release The Trip Odometer Button
After turning off the ignition, release the trip odometer reset button. The maintenance light should now be reset, indicating that the maintenance reminder has been successfully cleared.
Common Issues And Troubleshooting
When dealing with the Toyota Highlander push button start maintenance light, it’s essential to be aware of common issues and how to troubleshoot them effectively. Understanding these potential problems can save you time and frustration, ensuring that your maintenance light is reset correctly.
Maintenance Light Continues To Illuminate
If the maintenance light continues to illuminate after attempting to reset it, there could be several reasons for this persisting issue. One potential cause is that the reset procedure wasn’t performed correctly. In some cases, the maintenance reminder system may also need a manual reset. In such situations, start by ensuring that the reset steps are followed precisely as outlined in your vehicle’s manual.
If properly following the instructions does not resolve the issue, it’s recommended to consult a certified Toyota technician. They have the expertise and diagnostic tools to thoroughly inspect and identify any underlying issues that may be causing the maintenance light to persistently illuminate.
Maintenance Light Does Not Reset
In instances where the maintenance light does not reset after following the appropriate steps, there are potential factors to consider. First, verify that the push button start is functioning correctly and that the vehicle’s engine is turned off during the reset process.
Additionally, double-check that each step of the reset procedure, such as pressing the push button multiple times or holding it for a specific duration, is executed accurately. If the issue persists, it’s advisable to inspect the vehicle’s battery condition, as a low battery level can impact the reset function.
If troubleshooting the reset process and inspecting the battery do not resolve the issue, seeking assistance from a qualified Toyota service center is recommended. Their expertise will ensure a comprehensive diagnosis and resolution of any underlying issues affecting the maintenance light reset.
Credit: www.communitytoyota.com
Frequently Asked Questions Of How To Reset Toyota Highlander Maintenance Light Push Button Start
How Do I Reset The Maintenance Light On My Toyota Highlander With Push Button Start?
To reset the maintenance light on your Toyota Highlander with push button start, follow these steps:
1. Start your vehicle and make sure the trip meter displays ODO. 2. Turn the ignition off and press and hold the trip meter reset button. 3. While holding the button, turn the ignition on (do not start the engine) and continue holding the button until the ODO reading changes to all zeros.
What Does It Mean When The Maintenance Light Comes On In My Toyota Highlander?
When the maintenance light comes on in your Toyota Highlander, it indicates that scheduled maintenance or service is required. It is important not to ignore this light, as it helps ensure the optimal performance and longevity of your vehicle.
How Often Should I Reset The Maintenance Light On My Toyota Highlander?
You should reset the maintenance light on your Toyota Highlander after each scheduled maintenance or service. This helps to ensure that the maintenance reminder is accurate and provides you with an up-to-date indication of when your next service is due.
Conclusion
Resetting your Toyota Highlander’s maintenance light with push-button start is quick and simple. By following these steps, you can easily stay on top of your vehicle’s maintenance needs. Take control of your car’s health and ensure it runs smoothly for miles to come.
Keep driving with peace of mind.